How to Change Car Engine Oil?

You can either do it yourself or take services of an expert mechanic.


Changing your car engine oil isn’t a mind-numbing task; you can either do it yourself or take services of an expert mechanic. For professional oil replacement, we do recommend a local mechanic, however, we also like you to learn how to change motor oil. Here’s a short guide:

First Check if Oil Needs Replacement

Before you start the oil changing process, first ascertain if the oil needs replacement. Make it a routine to check the level of engine’s oil, which is simple. Just pull the dipstick out of the engine, clean it with a soft cloth, insert it back in the engine, and then pull it out. See the level and the condition of the oil. If the oil’s color is changed to brown with dirt particles in it, replace it.

Tools for Oil Swapping

For replacing car engine oil, first off, drain the old oil. But wait, do you have all the tools for the job? You need a car jack, jack stands, gloves, piece of cloth, wrench and oil drain pan. Once you are ready to drain the oil, turn on the ignition first so that the oil mixes up. Subsequently, detach the oil cap, put a pan underneath it, and loose the drain plug for the oil to come out. Once all the oil comes out, replace the oil filter which can be found near the middle or bottom of the engine.

Change Oil Filter

Nevertheless, every vehicle has its own arrangement of components, so just consult your owner’s manual to find the location of the filter and its type. Once you find it, just unscrew it, oil the new filter a little to regain the proper oil pressure, insert it into the slot and screw it. The last part of the process is adding the new oil, which is reasonably straightforward. Make sure you have the right oil as discussed above.

Check Level of Car Engine Oil

Simply place the funnel inside the engine hole and start pouring oil into it slowly. But wait, do you know how much car engine oil you should add? It is also a crucial part; you need to top it up to the optimum level. Neither lower nor in excess! Once you fill the required amount in, tighten the cap by twisting it clockwise. Now take a test drive ensuring there are no leaks or drips. The oil pressure light should be disappeared by now. And yes, do not forget to note down the odometer reading, so you remember when you should change the oil next.

Finally, you need to dispose of the dirty old oil into an approved facility. Better to secure it in a sealed container and trade it in the oil market. Do not neglect to dump off the old oil filter along with it.


You might also like

Leave A Reply

Your email address will not be published.